Keyboard_COMMANDS.TXT

Please see Commands.txt for the full list of network-supported commands.

THESE COMMANDS CAN BE PROGRAMMED INTO THE CONTOUR SHUTTLEPRO!  You can use the ShuttlePro to control the camera either from your main camera control PC or remotely over the network/internet using these keyboards shortcuts via the ShuttlePro.

CamMotion Sony Camera XCAM programs and ReXCAM5 accept the following keyboard commands:

Some cameras don't support all the optical controls (D30 has no red gain control, for example).  The most popular cameras today (D70 and BRC-300) use all of these.



Optical Keyboard Commands:

(NOTE:	Many of these commands re-set the AutoExposure mode to permit variable settings.
	To resetore autoexposure to full auto mode, use the E key command - see below.

I - IrisUp	(increase iris setting)
i - IrisDn	(decrease iris setting)
O - ApertureUp	(increase aperture)
o - ApertureDn	(decrease aperture)
S - ShutterUp	(increase shutter speed)
s - ShutterDn	(decrease shutter speed)
J - RedUp	(increase red gain)
j - RedDn	(decrease red gain)
K - BlueUp	(increase blue gain)
k - BlueDn	(decrease blue gain)
G - GainUp	(increase gain)
g - GainDn	(decrease gain)
B - BrightUp	(increase brightness)
b - BrightDn	(decrease brightness)
E - AEOn	(return turn auto exposure to full auto - cancels above commands)



Zoom and Focus Keyboard Commands:

Z - ZoomIn5	(zoom in 5 units)
z - ZoomOut5	(zoom out 5 units)
> - Zoom+	(zoom in smoothly until stopped using h key)
< - Zoom-	(zoom out smoothly until stopped using h key)
A - FocusAuto	(set focus to auto)
M - FocusMan	(set focus to manual)
F - FocNear	(move focus closer to camera 1 unit)
f - FocFar	(move focus farther from camera 1 unit)
h - Halt	(stop all continuous pan/tilt/zoom)



Pan and Tilt Keyboard Commands:

R - PanR10	(pan right 10 units)
r - PanR1	(pan right 1 unit)
L - PanL10	(pan left 10 units)
l - PanL1	(pan left 1 unit)
U - TiltU10	(tilt up 10 units)
u - TiltU1	(tilt up 1 unit)
D - TiltD10	(tilt down 10 units)
d - TiltD1	(tilt down 1 unit)
H - CamHome	(move camera to home/center pan/tilt position)
h - Halt	(stops all continuous pan/tilt/zoom)
right-arrow = mover 	- move right continuously at speed currently set
left-arrow = movel 	- move left continuously at speed currently set
up-arrow  = moveu  	- move up continuously at speed currently set
down-arrow = moved 	- move down continuously at speed currently set
T - ToggleTour	(turn auto-tour of presets on/off)

these are the numeric keys at the top of the QWERTY keyboard, used to 'go' and 'set' presets:

1, 2, 3, 4, 5, 6, 7, 8, 9, 0 = go to presets 1, 2, 3, 4, 5...
!, @, #, $, %, ^, &, *, (, ) = set presets 1, 2, 3, 4, 5...

iow, 3 = go to preset 3
     # = set preset 3 (shift-3)



Miscellaneous Keyboard Commands:

V - VerboseTog 	(toggle verbose mode on/off)
P - CamPower	(toggle camera power on/off)
(spacebar) 	- used to pull T-bar on Cosmos systems with video switcher
(function keys) - used to select cameras on Cosmos/MultiCamera systems
F1		- SelCam1 (select camera #1 on Cosmos/MultiCamera systems)
F2		- SelCam2 (select camera #2 on Cosmos/MultiCamera systems)
...



Numeric Keypad Keys:

1, 3, 5, 7, and 9 = User1, User3, User5, User7, and User9 UserScript Button commands